- Hotline: 0938 942 483
-
Manual Valves
Ball Valves
Ball Valves
Full bore ball valve with drain tap
Threaded ends F/F
With brass valve body
Working pressure 20 bar
Working temperature -10°C + 110°C
Applications: Discharge from heating systems, pressure control.
Ball Valves
Full bore ball valve
Threaded ends F/F
With brass valve body
Working pressure 16-50 bar
Working temperature -20° C +160° C
Applications: hydraulic, sanitary, compressed air industries
Butterfly Valves
Butterfly Valves
Butterfly valve WAFER type
Flanged ands PN16
With cast iron GJL 250 valve body
Working pressure 16 bar
Working temperature -20° C +120° C
Applications: the buttery valve Wafer are suitable for use in water supply, heating, air conditioning, industrial, irrigation and compressed air system
Butterfly Valves
Butterfly valve WAFER type
Flanged ands PN16
With cast iron GJL 250 valve body
Working pressure 16 bar
Working temperature -20° C +120° C
Applications: the buttery valve Wafer Lug are suitable for use in water supply, heating, air conditioning, industrial, irrigation and compressed air system
Check Valves
Check Valves
Swing check valve
Flanged ands PN16
With cast iron GJL 500 valve body
Working pressure PN16
Working temperature -10°C + 80°C
Applications: Hydrotermosanitary plants, acqueducts, waste water, fire safety system.
Check Valves
Dual plate check valve. Wafer type.
Flanged ands PN16
With cast iron GJL 250 valve body
Working pressure PN16
Working temperature -10°C + 110°C
Applications: The dual plate check valve are suitable for use in hydrotermosanitary plants, acqueducts, waste water, re safety, compressed air.
Check Valves
Galvanized carbon steel single disc WAFER swing check valve
Valve body by steel
Working pressure: PN10 / PN16
Working temperature -10°C + 100°C
Applications: The Galvanized carbon stell single are suitable for use in industrial, chemical and food plants.
Check Valves
Check valve rubber seat TG with metallic seat TM
Valve body by brass
Working pressure: 16 bar
Working temperature 0 °C + 90 °C
Threaded ends
Applications: Hydrotermosanitary plants, acqueducts, waste water, fire safety system.
Check Valves
Check valve heavy pattern - light type
Connection with threaded ends F/F
Valve body by brass
Working pressure 8 - 25 bar
Working temperature 0 °C + 90 °C
Threaded ends UNI ISO 228/1
Applications: Hydrotermosanitary plants, acqueducts, waste water, fire safety system.
Gate Valves
Gate Valves
Gate valve PN 16
Connection with threaded ends F/F
Valve body by brass
Working pressure 16 bar
Working temperature 0°C + 90°C
Threaded ends UNI ISO 228/1
Applications: The gate valves are suitable for use in hydraulic, sanitary and irrigation plants.
Gate Valves
Gate valve
Working pressure 16 bar
Working temperature 120°C
Threaded ends UNI ISO 228/1
Applications: Non-rising steam resilient Gate Valves are used widely in tap water applications and sewage treatment in many industries
Flexible joint
Flexible joint
Flanged rubber flexible joint
Connection with flanged PN16
Valve body by EPDM + nylon
Working pressure P N 1 6
Working temperature -20°C + 115°C
Applications: Use in hydrotermosanitary plants, overheated water, compressed air, waterworks, hydrocarbons and oils.
Flexible joint
Flanged rubber flexible joint
Valve body by carbon steel
Working pressure P N 1 0
Working temperature -20°C + 115°C
Threaded ends U N I - I S O 2 2 8 / 1
Applications: Use in hydrotermosanitary plants, overheated water, compressed air, waterworks, hydrocarbons and oils,
Y Strainer
Y Strainer
Y strainer with mesh in inox AISI 304
Connection with threaded ends F/F
Valve body by brass
Working pressure 16 bar
Working temperature 0 °C + 90 °C
Threaded ends UNI ISO 228/1
Applications: Use in the hydraulic, sanitary, and irrigation plants.
Y Strainer
Y strainer with drain
Connection with flanged ends PN 16
Valve body by cast iron GJL 500
Working pressure PN 16
Working temperature 10°C + 120°C
Threaded ends UNI - EN 1092
Applications: Hydrotermosanitary plants, acqueducts, waste water, fire safety system.
Y Strainer
Y strainer with drain
Valve body by brass
Working pressure 16 bar
Working temperature 0 °C + 90 °C
Threaded ends UNI ISO 228/1
Applications: Used for many systems where a liquid needs to be pumped from a lower level holding area.
Foot valve
Foot valve
Foot valve
Valve body by brass
Working pressure 16 bar
Working temperature 0 °C + 90 °C
Threaded ends UNI ISO 228/1
Applications: Used for many systems where a liquid needs to be pumped from a lower level holding area.
Foot valve
Foot valve
Valve body by brass
Working pressure 16 bar
Working temperature 0 °C + 90 °C
Threaded ends UNI ISO 228/1
Applications: Used for many systems where a liquid needs to be pumped from a lower level holding area.
Pressure Reducing valve
Pressure Reducing valve
Pressure reducing valve with stainless steel seat
Threaded ends M/M - With pressure gauge connection 1/4”
Valve body by brass
In｛w max pressure 25 bar
/ Adjustement range 1/2” - 3/4” = 0,5 - 5 bar,1” - 2” = 1 - 5,5 bar
Working temperature + 80°C bar
Threaded ends UNI-ISO 228/1
Applications: Use in hydraulic installations in which reduction and regulation of pressure is necessary.
Pressure Reducing valve
Pressure reducing valve with stainless steel seat and union ends
Threaded ends M/M - With pressure gauge connection 1/4”
Valve body by brass
Inflow max pressure 25 bar
Adjustement range 1/2” - 3/4” = 0,5 - 5 bar,1” - 2” = 1 - 5,5 bar
Working temperature + 80°C bar
Threaded ends UNI-ISO 228/1
Applications: Use in hydraulic installations in which reduction and regulation of pressure is necessary.
Pressure Reducing valve
Pressure reducing valve with stainless steel seat and union ends
Threaded ends M/M - With pressure gauge connection 1/4”
Valve body by brass
Inflow max pressure 25 bar
Adjustement range 1/2” - 3/4” = 0,5 - 5 bar,1” - 2” = 1 - 5,5 bar,2”1/2 - 3” = 1 - 8 bar
Working temperature + 80°C bar
Threaded ends UNI-ISO 228/1
Applications: Use in hydraulic installations in which reduction and regulation of pressure is necessary.
Air vent
Air vent
Automatic air-vents with side discharging
Valve body by brass
Working pressure 10 bar
Working temperature 110°C bar
Threaded ends UNI-ISO 228/1
Applications: Combination Air Release and Vacuum Breaker Valves protect your piping system by automatically eliminating air pockets.
Balancing valve
Balancing valve
Connection with threaded F/F
With Fixed orifce DZR brass double reg valve
Working pressure 16 bar
Working temperature -10° C +130° C
Threaded ends ISO 228-1 ISO 7/1
Applications: The balancing valves are installed and used in centralised heating and cooling systems to obtain design flow rates of each
Balancing valve
Connection with flanged PN16
Valve body by Cast iron double setting valve with test points in DZR brass
Working pressure 16 bar
Working temperature -10° C +110° C
Threaded ends ISO 228-1 ISO 7/1
Applications: Use in centralised heating and cooling systems to obtain design flow rates of each terminal units and balancing the circuits in the building